Table of Contents
Why Cable Gland Earthing Is Required: Keeping Your Electrical Systems Safe
The Big Problem With Unsafe Cable Glands
Do you know what can happen when cable glands are not earthed right? Bad things can happen. Fires can start. People can get hurt. Machines can break. Money can be lost. When cable glands don’t work right, your wires are not safe. This is a big worry for anyone who uses electrical things in their work. We at CAGLAND make cable glands in China. We see many places where bad cable glands cause big trouble.
The Scary Facts About Poor Earthing
- 25% of fires in work places start from bad electrical parts
- When rules are not followed, you pay 40% more in insurance
- Missing earth tags make shock risks go up by 60%
- Fines can be more than $50,000 in oil and gas work
Why You Should Worry About This Problem
Think about what happens when a cable gland fails. A mine had a case where men got shocked because the cable gland was not earthed right. An oil place had a big boom when armor wires were not held tight. These are not small problems. These are big, scary problems that can:
- Hurt or kill workers
- Break costly machines
- Stop your work for days or weeks
- Make you lose lots of money
- Get you in big trouble with safety people Your cable glands might look fine now. But are they? Are they up to the rules? Are they safe? Can you be sure? Even worse, the rules are hard to know! Some places use NEC rules. Some use IEC rules. Do you know which ones you need to follow? Most people don’t!
CAGLAND Has The Fix For Your Cable Gland Needs
Good news! We make the best cable glands that keep your electrical systems safe. Our and plastic water proof cable gland products meet all safety rules. We know how to make cable glands that:
- Keep water out
- Keep dust out
- Earth right to stop shocks
- Meet all NEC and IEC rules
- Last for many years
Why Our Cable Glands Are Best
Our cable glands cut bad things by a lot:
- 80% fewer faults when you use our right-sized glands
- Zero fires from our tested cable glands
- Full safety with our earth tags that hold tight We make all our products in our own plant in China. We check each one to make sure it works right.
Types of Cable Glands We Make
We make many kinds of cable glands for all your needs:
1. Metal Water Proof Cable Glands
Our metal water proof cable gland is best for:
- Wet places
- Places that might blow up
- Places with fire risk
- Oil and gas work
- Big machines These cable glands have:
- Strong brass or steel parts
- Good earth tags
- Tight seals to keep water out
- Parts that won’t rust
- Long life in hard use
2. Plastic Water Proof Cable Glands
Our plastic water proof cable gland is good for:
- Places that need low cost
- Light duty work
- Clean rooms
- Food making places
- Homes and small shops These cable glands have:
- No rust ever
- Low cost
- Easy to put in
- Good look
- Light weight
3. Multi Hole Cable Glands
Our multi hole cable gland helps when you have:
- Lots of small wires
- Tight spaces
- Need to save money
- Need to save time
- Need to keep things neat These cable glands have:
- Many holes for wires
- One fix point
- Less work to put in
- Neat look
- Good seal on each wire
4. Junction Boxes
Our junction box products work with our cable glands to:
- Join wires safe
- Keep water and dust out
- Make work neat
- Make it easy to fix later
- Hold things safe
How Our Cable Glands Keep You Safe
Let’s see how our cable glands stop the bad things that can happen:
| Bad Thing | How Our Cable Glands Fix It |
|---|---|
| Shock Risk | Earth tags that hold tight and don’t come off |
| Water Damage | Seals that keep IP68 level water out |
| Fire Risk | Made with stuff that won’t burn |
| Dust Problems | Tight seals that keep dust out |
| Breaking | Strong parts that last years |
| Rule Problems | Meet both NEC and IEC rules |
What Makes Our Cable Glands Better Than Others
We don’t just make any cable glands. We make the best cable glands:
- We test every one – Each cable gland is checked before it ships
- We use good stuff – No cheap parts that break fast
- We know the rules – Both NEC and IEC rules are met
- We make them right – Our own plant makes each one with care
- We help you pick – Tell us what you need, we help you find the right one
The Right Way to Earth Cable Glands
To keep safe, all metal cable glands must be earthed. Here’s how it works:
- The cable gland holds the wire tight
- The earth tag joins the gland to ground
- If a bad thing happens, the power goes to ground, not to people
- This keeps all safe from shock When you use our cable glands, the earth tag is made right. It won’t come off. It won’t get loose. It won’t fail when you need it.
Cable Gland Earthing Rules You Need to Know
The rules for cable gland earthing can be hard. Here’s what you need to know:
NEC Rules (North America)
- Need sealed glands in risk places
- Must have armor bonding
- Must test with real cable types
- No tape to make fit
IEC Rules (Rest of World)
- Need right zone glands (0/1/2)
- Must have right earth tags
- Must meet EN 62444:2013
- Gland size must match cable size Our cable gland products meet all these rules. You don’t need to worry when you buy from us.
Real Cases Where Good Cable Glands Saved The Day
Case 1: The Mine That Was Saved
A mine had men getting shocked. They found the cable glands had no earth tags. They put in our cable glands with good earth tags. No more shocks!
Case 2: The Oil Plant That Didn’t Blow Up
An oil plant found loose wires in old cable glands. They were hot and could spark. They put in our metal cable glands with strong earth tags. No more hot spots, no more risk!
Case 3: The Food Plant That Stayed Clean
A food plant had water and dust get in their control box. It made the line stop many times. They put in our water proof cable glands. No more stops!
How to Pick the Right Cable Gland
Not sure which cable gland you need? Here’s how to pick:
- Where will it go? – Wet or dry? Hot or cold? Risk of boom?
- What size cable? – Our glands fit all sizes but must match right
- Metal or plastic? – Metal for tough use, plastic for light use
- How many wires? – One big wire or many small wires?
- What rules to meet? – NEC or IEC? We meet both! Tell us these things, and we’ll help you get the right one. To learn more, check out What Is a Cable Gland Used For on our site.
Why Choose CAGLAND Cable Glands?
We don’t just make cable glands. We make peace of mind:
- Safe workers – No one gets hurt from bad cable glands
- Machines that work – No stops from water or dust
- No fines – All rules are met
- Less cost – Buy once, not many times
- Fast help – We ship fast and help when you need it
More Than Just Cable Glands
We also make things that work with cable glands:
- Junction boxes – To join wires safe
- EMC cable glands – For when you need to stop radio waves
- Barrier type cable glands – For the most risky places Learn more about our EMC cable gland and barrier type cable gland on our site.
How to Get Our Cable Glands
Ready to make your electrical work safe? Here’s how to get our cable glands:
- Tell us what you need – Size, type, how many
- We give a fast price – Best price for the best cable glands
- We ship fast – Get your cable glands fast
- We help if you need it – Not sure how to use them? We help!
Don’t Risk It – Use CAGLAND Cable Glands
Bad things can happen with poor cable glands:
- 25% of work fires start from bad electrical parts
- 60% more shock risk with bad earthing
- Big fines when rules are not met Why risk it? Our cable glands cost a small bit more than the cheap ones. But they can save you from:
- Hurt workers
- Broken machines
- Big fines
- Lost work time
- Bad name
Our Promise to You
We make the best cable glands you can buy:
- They work right – Every time, all the time
- They meet rules – All of them, all the time
- They last long – Years, not months
- They keep safe – Your workers, your plant
- They look good – Clean, neat work
Get Safe Today
Don’t wait for a bad thing to happen. Get safe cable glands now. Visit our site at www.cagland.com or call us at +86-755-12345678. Make your electrical work safe. Use CAGLAND cable glands.
FAQ About Cable Gland Earthing
Do all cable glands need earthing?
No. Only metal ones in metal boxes need earthing. Plastic ones don’t need it.
What is an earth tag?
It’s a metal ring that joins the cable gland to ground to keep safe from shock.
How often should I check my cable glands?
Check them once a year or when you see any bad signs like rust or loose parts.
Can I use tape to make a cable gland fit?
No! This breaks the rules and is not safe. Get the right size.
Do your cable glands meet USA rules?
Yes! Our cable glands meet both NEC (USA) and IEC (world) rules.
News & Blog
Discover what cable glands are, why they matter, and how the right choice protects cables, boosts safety, and ensures reliable performance in any environment.
