Anti-bending Cable Gland

What Is This?

This is a prensaestopas that stops your cables from bending too much. It keeps cables safe when they move a lot or get pulled.

Why You Need It

  • Stops breaks in your cables
  • Keeps water out with IP68 seal
  • Works in hot and cold places
  • Fits many cable sizes
  • Lasts a long time

Cool Things About Our Cable Gland

PartWhat It’s Made OfWhat It Does
BodyNylon or BrassStays strong, won’t rust
SpringStainless SteelStops cables from bending too much
SealSpecial rubberKeeps water and dust out

Where To Use It

Our metal water proof cable gland works great in:

  • Wind farms where it’s very windy
  • Underwater places that get wet
  • Factories with moving machines
  • Oil rigs where safety is big
  • Cold rooms that freeze things

How It Protects

El spiral spring inside helps the cable bend a little bit, but not too much. This makes your cables last longer and work better.

Stays Strong In Tough Places

  • Works in super hot (up to +120℃)
  • Works in very cold (down to -40℃)
  • Keeps out all water (IP68 rated)
  • Safe for places that might go boom (ATEX certified)

Pick The Right Size

We have sizes for cables from very thin to very thick (up to 33mm). Not sure which to get? Check our size chart or ask us!

For bigger projects, try our prensaestopas multiagujero when you need to fit many cables in one spot.

Two Main Types

1. Nylon Anti-Bending Glands

  • Very light
  • Won’t rust
  • No bad smoke if there’s fire
  • Great for clean rooms

2. Metal Anti-Bending Glands

  • Super strong
  • Best for tough jobs
  • Works in very hot places
  • Stops radio waves

Need a full system? Check our caja de conexiones options that work with these glands!

Easy To Put On

  1. Put your cable through the gland
  2. Tighten it with your hand
  3. That’s it! Your cable is now safe

Why People Buy From Us

  • All our prensaestopas products pass tough tests
  • We make them strong to last many years
  • They work in very hot and very cold places
  • Our glands keep out all water and dust
  • They stop cables from getting hurt

Get Yours Today

Keep your cables safe from bends, pulls, and twists. Our anti-bending cable glands work in the toughest spots – wind farms, oil rigs, ships, and factories.

Order now to stop cable breaks before they start!

Consulta

Formulario de consulta

Especificación

Product Specification

Product NameAnti bending brass cable glands
ModeloM, PG, NPT, G thread types
Product MaterialNickel plated brass (body, tightening cap, nut); nitrile rubber (sealing ring, gasket)
Temperature rangeStatic -40 ℃ to 100 ℃, instantaneous heat resistance to 120 ℃; Dynamic -20 ℃ to 80 ℃, instantly heat-resistant to 100 ℃.
Product design featuresSpecial clamping claw and rubber component design, with a wide range of cable clamping and strong tensile strength
Product performanceWaterproof, dustproof, salt resistant, acid and alkali resistant, alcohol, grease and general solvents.
Protection levelIP66  IP68
Fire resistanceUL94 V-2
UV resistantF1
Environmental protectionCompliant with RoHs standards, halogen-free
CertificateCE, RoHS, REACH
Cable rangeRefer to the specification table for specific size specifications and display diagram
Special function availableExtended, anti bending, single hole, multi hole, semi through, straight through
ApplicationUsed in areas where a lot of cables and wires need to be inserted into housings with minimum space requirements
Machine and equipment manufacturing
Photovoltaic
Automation technology

anti bending brass cable glands drawing

anti bending brass cable glands m type

Technical Parameter

ModeloRango de cables (mm)Thread O.D. L2 (mm)Thread Length L1 (mm)Spanner Size A & E (mm)
M12-R3-6.511.759.718/16
M12-R2-511.759.718/16
M16-R4-815.759.422/19
M16-R2-615.759.422/19
M18-R5-1017.759.524/21
M18-R3-717.759.524/21
M20-R6-1219.751026/24
M20-R5-919.751026/24
M22-R10-1321.751030/27
M22-R7-1221.751030/27
M25-R12-1524.751034/29
M25-R10-1224.751034/29
M27-R13-1826.7512.636/33
M27-R9-1626.7512.636/33

 

 

Preguntas frecuentes sobre prensaestopas

¿Cuál es el MOQ que se puede pedir sobre el prensaestopas personalizado?

No hemos establecido un MOQ mínimo, personalizamos los productos según las necesidades del cliente. En teoría, podemos cumplir con los diferentes requisitos de MOQ de los clientes, pero diferentes MOQ tendrán diferentes costos.

¿Cuál es el tiempo de entrega para la producción por lotes?

Normalmente, nuestro tiempo de entrega es de 1 a 2 semanas para la producción por lotes. Para casos urgentes, podemos mejorarlo en 3~7 días.

¿Qué datos son necesarios proporcionar para obtener un precio estimado?

Necesitamos la dimensión, el color, el hilo, el material, la certificación y más aplicaciones serán útiles.

¿Qué certificados tienes?

Contamos con certificados CE, TUV y UL. 

¿Puedo recibir algunos ejemplos?

Ciertamente, podemos proporcionarle muestras estándar gratuitas según sus requisitos.