Anti-bending Cable Gland
What Is This?
This is a кабельный ввод that stops your cables from bending too much. It keeps cables safe when they move a lot or get pulled.
Why You Need It
- Stops breaks in your cables
- Keeps water out with IP68 seal
- Works in hot and cold places
- Fits many cable sizes
- Lasts a long time
Cool Things About Our Cable Gland
Part | What It’s Made Of | What It Does |
---|---|---|
Body | Nylon or Brass | Stays strong, won’t rust |
Spring | Stainless Steel | Stops cables from bending too much |
Seal | Special rubber | Keeps water and dust out |
Where To Use It
Our metal water proof cable gland works great in:
- Wind farms where it’s very windy
- Underwater places that get wet
- Factories with moving machines
- Oil rigs where safety is big
- Cold rooms that freeze things
How It Protects
The spiral spring inside helps the cable bend a little bit, but not too much. This makes your cables last longer and work better.
Stays Strong In Tough Places
- Works in super hot (up to +120℃)
- Works in very cold (down to -40℃)
- Keeps out all water (IP68 rated)
- Safe for places that might go boom (ATEX certified)
Pick The Right Size
We have sizes for cables from very thin to very thick (up to 33mm). Not sure which to get? Check our size chart or ask us!
For bigger projects, try our кабельный ввод с несколькими отверстиями when you need to fit many cables in one spot.
Two Main Types
1. Nylon Anti-Bending Glands
- Very light
- Won’t rust
- No bad smoke if there’s fire
- Great for clean rooms
2. Metal Anti-Bending Glands
- Super strong
- Best for tough jobs
- Works in very hot places
- Stops radio waves
Need a full system? Check our распределительная коробка options that work with these glands!
Easy To Put On
- Put your cable through the gland
- Tighten it with your hand
- That’s it! Your cable is now safe
Why People Buy From Us
- All our кабельный ввод products pass tough tests
- We make them strong to last many years
- They work in very hot and very cold places
- Our glands keep out all water and dust
- They stop cables from getting hurt
Get Yours Today
Keep your cables safe from bends, pulls, and twists. Our anti-bending cable glands work in the toughest spots – wind farms, oil rigs, ships, and factories.
Order now to stop cable breaks before they start!
Расследование
Спецификация
Product Specification
Product Name | Anti bending brass cable glands |
Модель | M, PG, NPT, G thread types |
Product Material | Nickel plated brass (body, tightening cap, nut); nitrile rubber (sealing ring, gasket) |
Temperature range | Static -40 ℃ to 100 ℃, instantaneous heat resistance to 120 ℃; Dynamic -20 ℃ to 80 ℃, instantly heat-resistant to 100 ℃. |
Product design features | Special clamping claw and rubber component design, with a wide range of cable clamping and strong tensile strength |
Product performance | Waterproof, dustproof, salt resistant, acid and alkali resistant, alcohol, grease and general solvents. |
Protection level | IP66 IP68 |
Fire resistance | UL94 V-2 |
UV resistant | F1 |
Environmental protection | Compliant with RoHs standards, halogen-free |
Certificate | CE, RoHS, REACH |
Cable range | Refer to the specification table for specific size specifications and display diagram |
Special function available | Extended, anti bending, single hole, multi hole, semi through, straight through |
Application | Used in areas where a lot of cables and wires need to be inserted into housings with minimum space requirements |
Machine and equipment manufacturing | |
Photovoltaic | |
Automation technology |
Technical Parameter
Модель | Диапазон кабелей (мм) | Thread O.D. L2 (mm) | Thread Length L1 (mm) | Spanner Size A & E (mm) |
---|---|---|---|---|
M12-R | 3-6.5 | 11.75 | 9.7 | 18/16 |
M12-R | 2-5 | 11.75 | 9.7 | 18/16 |
M16-R | 4-8 | 15.75 | 9.4 | 22/19 |
M16-R | 2-6 | 15.75 | 9.4 | 22/19 |
M18-R | 5-10 | 17.75 | 9.5 | 24/21 |
M18-R | 3-7 | 17.75 | 9.5 | 24/21 |
M20-R | 6-12 | 19.75 | 10 | 26/24 |
M20-R | 5-9 | 19.75 | 10 | 26/24 |
M22-R | 10-13 | 21.75 | 10 | 30/27 |
M22-R | 7-12 | 21.75 | 10 | 30/27 |
M25-R | 12-15 | 24.75 | 10 | 34/29 |
M25-R | 10-12 | 24.75 | 10 | 34/29 |
M27-R | 13-18 | 26.75 | 12.6 | 36/33 |
M27-R | 9-16 | 26.75 | 12.6 | 36/33 |
Часто задаваемые вопросы о кабельном вводе
Мы не устанавливаем минимальный минимальный объем заказа, мы изготавливаем продукты в соответствии с потребностями клиентов. Теоретически мы можем удовлетворить различные требования клиентов к MOQ, но разные MOQ будут иметь разную стоимость.
Обычно наше время выполнения заказа составляет 1-2 недели для серийного производства. В срочных случаях мы можем улучшить его в течение 3-7 дней.
Нам нужны размеры, цвет, нить, материал, сертификация и другие приложения, которые будут полезны.
У нас есть сертификаты CE, TUV и UL.
Конечно, мы можем предоставить вам бесплатные стандартные образцы в соответствии с вашими требованиями.