Anti-bending Cable Gland
What Is This?
This is a 电缆接头 that stops your cables from bending too much. It keeps cables safe when they move a lot or get pulled.
Why You Need It
- Stops breaks in your cables
- Keeps water out with IP68 seal
- Works in hot and cold places
- Fits many cable sizes
- Lasts a long time
Cool Things About Our Cable Gland
Part | What It’s Made Of | What It Does |
---|---|---|
Body | Nylon or Brass | Stays strong, won’t rust |
Spring | Stainless Steel | Stops cables from bending too much |
Seal | Special rubber | Keeps water and dust out |
Where To Use It
Our metal water proof cable gland works great in:
- Wind farms where it’s very windy
- Underwater places that get wet
- Factories with moving machines
- Oil rigs where safety is big
- Cold rooms that freeze things
How It Protects
这 spiral spring inside helps the cable bend a little bit, but not too much. This makes your cables last longer and work better.
Stays Strong In Tough Places
- Works in super hot (up to +120℃)
- Works in very cold (down to -40℃)
- Keeps out all water (IP68 rated)
- Safe for places that might go boom (ATEX certified)
Pick The Right Size
We have sizes for cables from very thin to very thick (up to 33mm). Not sure which to get? Check our size chart or ask us!
For bigger projects, try our 多孔电缆接头 when you need to fit many cables in one spot.
Two Main Types
1. Nylon Anti-Bending Glands
- Very light
- Won’t rust
- No bad smoke if there’s fire
- Great for clean rooms
2. Metal Anti-Bending Glands
- Super strong
- Best for tough jobs
- Works in very hot places
- Stops radio waves
Need a full system? Check our 接线盒 options that work with these glands!
Easy To Put On
- Put your cable through the gland
- Tighten it with your hand
- That’s it! Your cable is now safe
Why People Buy From Us
- All our 电缆接头 products pass tough tests
- We make them strong to last many years
- They work in very hot and very cold places
- Our glands keep out all water and dust
- They stop cables from getting hurt
Get Yours Today
Keep your cables safe from bends, pulls, and twists. Our anti-bending cable glands work in the toughest spots – wind farms, oil rigs, ships, and factories.
Order now to stop cable breaks before they start!
询问
规格
Product Specification
Product Name | Anti bending brass cable glands |
模型 | M, PG, NPT, G thread types |
Product Material | Nickel plated brass (body, tightening cap, nut); nitrile rubber (sealing ring, gasket) |
Temperature range | Static -40 ℃ to 100 ℃, instantaneous heat resistance to 120 ℃; Dynamic -20 ℃ to 80 ℃, instantly heat-resistant to 100 ℃. |
Product design features | Special clamping claw and rubber component design, with a wide range of cable clamping and strong tensile strength |
Product performance | Waterproof, dustproof, salt resistant, acid and alkali resistant, alcohol, grease and general solvents. |
Protection level | IP66 IP68 |
Fire resistance | UL94 V-2 |
UV resistant | F1 |
Environmental protection | Compliant with RoHs standards, halogen-free |
Certificate | CE, RoHS, REACH |
Cable range | Refer to the specification table for specific size specifications and display diagram |
Special function available | Extended, anti bending, single hole, multi hole, semi through, straight through |
Application | Used in areas where a lot of cables and wires need to be inserted into housings with minimum space requirements |
Machine and equipment manufacturing | |
Photovoltaic | |
Automation technology |
Technical Parameter
模型 | 电缆范围(毫米) | Thread O.D. L2 (mm) | Thread Length L1 (mm) | Spanner Size A & E (mm) |
---|---|---|---|---|
M12-R | 3-6.5 | 11.75 | 9.7 | 18/16 |
M12-R | 2-5 | 11.75 | 9.7 | 18/16 |
M16-R | 4-8 | 15.75 | 9.4 | 22/19 |
M16-R | 2-6 | 15.75 | 9.4 | 22/19 |
M18-R | 5-10 | 17.75 | 9.5 | 24/21 |
M18-R | 3-7 | 17.75 | 9.5 | 24/21 |
M20-R | 6-12 | 19.75 | 10 | 26/24 |
M20-R | 5-9 | 19.75 | 10 | 26/24 |
M22-R | 10-13 | 21.75 | 10 | 30/27 |
M22-R | 7-12 | 21.75 | 10 | 30/27 |
M25-R | 12-15 | 24.75 | 10 | 34/29 |
M25-R | 10-12 | 24.75 | 10 | 34/29 |
M27-R | 13-18 | 26.75 | 12.6 | 36/33 |
M27-R | 9-16 | 26.75 | 12.6 | 36/33 |
关于电缆接头的常见问题
我们没有设置最小起订量,我们根据客户需求定制产品。理论上,我们可以满足客户不同的最小起订量要求,但不同的最小起订量会有不同的成本。
通常我们的批量生产提前期为 1 ~ 2 周。对于紧急情况,我们可以在 3~7 天内改进。
我们确实需要尺寸、颜色、螺纹、材料、认证,更多的应用程序将有所帮助。
我们有 CE、TUV 和 UL 证书。
当然,我们可以根据您的要求为您提供免费的标准样品。