Anti-bending Cable Gland

What Is This?

This is a Prensa-cabo that stops your cables from bending too much. It keeps cables safe when they move a lot or get pulled.

Why You Need It

  • Stops breaks in your cables
  • Keeps water out with IP68 seal
  • Works in hot and cold places
  • Fits many cable sizes
  • Lasts a long time

Cool Things About Our Cable Gland

PartWhat It’s Made OfWhat It Does
BodyNylon or BrassStays strong, won’t rust
SpringStainless SteelStops cables from bending too much
SealSpecial rubberKeeps water and dust out

Where To Use It

Our metal water proof cable gland works great in:

  • Wind farms where it’s very windy
  • Underwater places that get wet
  • Factories with moving machines
  • Oil rigs where safety is big
  • Cold rooms that freeze things

How It Protects

spiral spring inside helps the cable bend a little bit, but not too much. This makes your cables last longer and work better.

Stays Strong In Tough Places

  • Works in super hot (up to +120℃)
  • Works in very cold (down to -40℃)
  • Keeps out all water (IP68 rated)
  • Safe for places that might go boom (ATEX certified)

Pick The Right Size

We have sizes for cables from very thin to very thick (up to 33mm). Not sure which to get? Check our size chart or ask us!

For bigger projects, try our prensa-cabo multifuro when you need to fit many cables in one spot.

Two Main Types

1. Nylon Anti-Bending Glands

  • Very light
  • Won’t rust
  • No bad smoke if there’s fire
  • Great for clean rooms

2. Metal Anti-Bending Glands

  • Super strong
  • Best for tough jobs
  • Works in very hot places
  • Stops radio waves

Need a full system? Check our caixa de junção options that work with these glands!

Easy To Put On

  1. Put your cable through the gland
  2. Tighten it with your hand
  3. That’s it! Your cable is now safe

Why People Buy From Us

  • All our Prensa-cabo products pass tough tests
  • We make them strong to last many years
  • They work in very hot and very cold places
  • Our glands keep out all water and dust
  • They stop cables from getting hurt

Get Yours Today

Keep your cables safe from bends, pulls, and twists. Our anti-bending cable glands work in the toughest spots – wind farms, oil rigs, ships, and factories.

Order now to stop cable breaks before they start!

Investigação

formulário de consulta

Especificação

Product Specification

Product NameAnti bending brass cable glands
ModeloM, PG, NPT, G thread types
Product MaterialNickel plated brass (body, tightening cap, nut); nitrile rubber (sealing ring, gasket)
Temperature rangeStatic -40 ℃ to 100 ℃, instantaneous heat resistance to 120 ℃; Dynamic -20 ℃ to 80 ℃, instantly heat-resistant to 100 ℃.
Product design featuresSpecial clamping claw and rubber component design, with a wide range of cable clamping and strong tensile strength
Product performanceWaterproof, dustproof, salt resistant, acid and alkali resistant, alcohol, grease and general solvents.
Protection levelIP66  IP68
Fire resistanceUL94 V-2
UV resistantF1
Environmental protectionCompliant with RoHs standards, halogen-free
CertificateCE, RoHS, REACH
Cable rangeRefer to the specification table for specific size specifications and display diagram
Special function availableExtended, anti bending, single hole, multi hole, semi through, straight through
ApplicationUsed in areas where a lot of cables and wires need to be inserted into housings with minimum space requirements
Machine and equipment manufacturing
Photovoltaic
Automation technology

anti bending brass cable glands drawing

anti bending brass cable glands m type

Technical Parameter

ModeloFaixa de cabo (mm)Thread O.D. L2 (mm)Thread Length L1 (mm)Spanner Size A & E (mm)
M12-R3-6.511.759.718/16
M12-R2-511.759.718/16
M16-R4-815.759.422/19
M16-R2-615.759.422/19
M18-R5-1017.759.524/21
M18-R3-717.759.524/21
M20-R6-1219.751026/24
M20-R5-919.751026/24
M22-R10-1321.751030/27
M22-R7-1221.751030/27
M25-R12-1524.751034/29
M25-R10-1224.751034/29
M27-R13-1826.7512.636/33
M27-R9-1626.7512.636/33

 

 

Perguntas frequentes sobre prensa-cabo

Qual é o MOQ que pode ser encomendado sobre o prensa-cabo personalizado?

Não definimos um MOQ mínimo, personalizamos os produtos de acordo com as necessidades do cliente. Em teoria, podemos atender a diferentes requisitos de MOQ dos clientes, mas diferentes MOQs terão custos diferentes.

Qual é o prazo de entrega para a produção em lote?

Normalmente, nosso prazo de entrega é de 1 a 2 semanas para produção em lote. Para casos urgentes, podemos melhorá-lo em 3 a 7 dias.

Quais detalhes são necessários para fornecer a fim de obter uma estimativa de preço?

Precisamos da dimensão, cor, linha, material, certificação e mais aplicações serão úteis.

Quais certificados você tem?

Temos certificados CE, TUV e UL. 

Posso receber alguns exemplos?

Certamente, podemos fornecer amostras padrão gratuitas de acordo com sua exigência.