Armored Cable Glands
What Is It?
Un armored cable gland is a strong box that holds wires safe. It keeps dust and water away from your wires. These are made to last a long time.
What It Does
- Keeps wires safe
- Stops water from getting in
- Blocks dust and dirt
- Holds cables tight
- Helps with safety
Types We Have
Type | Made Of | Good For |
---|---|---|
Basic | Brass with nickel | Most places |
Strong | Stainless steel | Wet places |
Extra Safe | Double seal | Places that might blow up |
Where To Use It
- Factories with lots of machines
- Oil rigs where they pump oil
- Wind farms that make power
- Big phone towers for cell phones
- Places that get very hot or cold
Why Pick Our Glands
- Works in hot places up to 130°C
- Works in cold places down to -60°C
- Keeps water out with IP65 and IP68 score
- Fits many sizes from 8mm to 75mm
- Made with strong stuff that lasts
For Your Safety
Our cable glands have test marks that show they are safe. They pass big tests like:
- IECEx for safe use
- ATEX for places that could blow up
- BS6121 for being well made
How To Pick
Pick the size that fits your wire. We have all sizes. Our metal water proof cable gland is best for wet places.
If you need a gland for many wires, try our presse-étoupe multitrou.
For a full set up, you might need a Boîte de dérivation too.
Good Things About Our Glands
- Can be used outside in rain and sun
- Stops bad stuff from hurting your wires
- Helps keep EMC safe (that’s about waves in the air)
- Has rings that hold SWA/AWA wires tight
- Won’t break if it gets hit
The Big Market
More people buy these each year. By 2030, this will be a $2.78 billion market. Smart grids and green power need these a lot.
Best Uses
- Smart homes that need safe wires
- Green power from sun and wind
- Big data places with lots of computers
- Oil and gas work that must be safe
- Phone towers that need to work all the time
Get Yours Now
Visit our main site to see all our presse-étoupe types.
We make them just right for you. They will work in dust, rain, heat, or cold.
Our glands keep your wires safe so you can work with no fear.
Demande
spécification
Product Specification
Product Name | Armored stuffing box joint |
working temperature | -50 ℃ to 120 ℃ |
Protection level | IP66 |
Certificate | SYEx24.0123X |
Product performance | Waterproof, dustproof, salt resistant, acid and alkali resistant, alcohol, grease and general solvents. |
Cable range selection | See table parameters for details |
Scope of application | Suitable for Zone 1 and Zone 2 explosive gas environments Suitable for Zone 21 and Zone 22 environments with combustible dust; Suitable for IIA, IB, IIC explosive gas environments: Widely used in explosive hazardous areas such as petroleum extraction, storage, chemical, pharmaceutical, military, and military facilities: As a supporting accessory for explosion-proof electrical equipment, it is used to clamp various armored or non armored cables. |
Technical Parameter
Thread specification | Range of incoming lines (mm) | Maximum output line (mm) | L (mm) | A (mm) | Wrench Size A/B (mm) | ||
---|---|---|---|---|---|---|---|
M | g | NPT | |||||
M16x1.5 | 5~8 | 12 | 67.5 | 16 | 24/26.5 | ||
M20x1.5 | G1/2″ | NPT1/2″ | 5~15 | 12 | 67.5 | 16 | 24/26.5 |
M25x1.5 | G3/4″ | NPT 3/4″ | 8~20 | 18 | 67.5 | 17 | 30/33 |
M32x1.5 | 10~25 | 22 | 75 | 17 | 38/42 | ||
M40x1.5 | G1¼” | NPT1¼” | 12~30 | 30 | 84 | 18 | 46/50 |
M50x1.5 | G1½” | NPT1½” | 14~38 | 34 | 89 | 18 | 55/60 |
M63x1.5 | G2″ | NPT2″ | 20~48 | 44 | 98 | 20 | 68/73 |
M75x1.5 | G2½” | NPT 2½” | 24~58 | 52 | 107 | 20 | 84/92 |
M88x1.5 | 30~70 | 65 | 110 | 20 | 97/105 | ||
M100x1.5 | G3½” | NPT 3½” | 45~102 | 84 | 120 | 20 | 125/136 |
M110x1.5 | 45~102 | 90 | 120 | 20 | 125/136 | ||
M115x1.5 | G4″ | NPT4″ | 45~102 | 90 | 120 | 20 | 125/136 |
Foire aux questions sur le presse-étoupe
Nous n'avons pas fixé de MOQ minimum, nous personnalisons les produits en fonction des besoins des clients. En théorie, nous pouvons répondre aux différentes exigences MOQ des clients, mais différents MOQ auront des coûts différents.
Normalement, notre délai de livraison est de 1 à 2 semaines pour la production par lots. Pour les cas urgents, nous pouvons l'améliorer en 3 à 7 jours.
Nous avons besoin de la dimension, de la couleur, du fil, du matériau, de la certification et d'autres applications seront utiles.
Nous avons des certificats CE, TUV et UL.
Certes, nous pouvons vous fournir les échantillons standard gratuits selon vos besoins.